The Bublue C10 is an advanced pool cleaning robot that combines powerful drive with intelligent navigation and convenient app control. Three independent motors supported by Bluehole Tech™ technology provide high suction power and stable operation, allowing you to effectively remove dirt from the bottom, walls, and waterline. The cleaning system means that one cycle is enough to comprehensively refresh the entire pool, and Bluesonic Path™ technology with AI algorithms intelligently maps the robot's route, maximizing surface coverage and eliminating random movements. With an operating time of up to 120 minutes, it can handle pools with an area of up to approximately 80 m². The device is suitable for use in all types of pools. After completing the cleaning cycle, the Bublue C10 parks itself against the pool wall, making it quick and easy to remove from the water. The whole thing is complemented by a durable construction made of UV-resistant materials.
The Bluehole™ technology used in the Bublue C10 robot, combined with a three-motor drive system, is responsible for high and stable suction power throughout the entire operating cycle. The system provides a performance of 3434 GPH, which translates into efficient suction of debris and its effective removal to the filter basket. The robot's design also allows for twice as intense scrubbing of the surface, which allows for more thorough removal of deposits and dirt adhering to the bottom and walls of the pool. In addition, the dual drive system ensures stable movement of the robot and allows it to easily cope with obstacles and steps in the pool. This solution supports smooth movement across different surfaces, increasing traction and control.
Bluesonic Path™ technology uses AI algorithms to intelligently plan the cleaning route to best cover the entire pool surface. The robot moves according to optimized S- and N-shaped patterns, adjusting the width of its passes to the current conditions and size of the working area. Thanks to intelligent path control, the device minimizes the risk of missing any part of the pool floor. Three cleaning modes are available, allowing you to choose the mode that best suits your needs. There is an automatic mode (Auto Mode), a floor cleaning mode (Floor Mode), and a wall cleaning mode (Wall Mode).
The improved filtration system uses a 180 μm filter and a 4-liter basket. This solution allows for the effective capture of very fine debris, including sand-sized particles, while allowing for the collection of more debris during a single cycle. As a result, filtration remains effective even in the presence of a mixture of fine sediment and larger elements such as leaves or small pebbles.
The mobile app allows you to conveniently control the robot and create a personalized cleaning plan directly from your smartphone. With its help, you can select the cleaning mode, adjust the length of the operating cycle, and set the width of the passage, adapting the robot's operation to your current needs. The app supports Wi-Fi and Bluetooth (2.4 GHz Wi-Fi) connections and offers OTA updates, allowing you to take advantage of new features and improvements.
The 5200 mAh battery provides up to 120 minutes of operation on a single charge, allowing you to clean pools with an area of up to approximately 80 m². It takes about 3.4 hours to fully charge the device. When the battery is low, the Bublue C10 automatically parks near the wall, making it much easier to remove it from the water. The LED indicator signals the current status of the device: blue means it is operating at a charge level of 40 to 100%, orange at a level of 20 to 40%, yellow signals a low energy level (below 20%), green indicates charging, and red indicates an error.
The device is designed to work on various materials, such as concrete, vinyl, fiberglass, and ceramic tiles, and is suitable for pools of various shapes, including rectangular, round, irregular, and multi-zone. Each unit is rigorously tested for watertightness and mobility, and the UV-resistant housing is designed to reduce aging and material degradation. The robot's design has been adapted to work at depths of up to 3 meters to ensure watertightness and proper component operation. Maintenance has also been simplified as much as possible – simply remove the filter basket and rinse the mesh thoroughly with clean water to remove any accumulated debris.
| Manufacturer | Bublue |
|---|---|
| Model | C10-WH-EU |
| Charger input voltage | 100Vac-240Vac, 50Hz/60Hz |
| Nominal charger output voltage | 21 V |
| Nominal charger output current | 2.6 A |
| Maximum operating time | 120 minutes |
| Battery capacity | 5200 mAh |
| Charging time | 3.4 hours |
| Ingress protection rating | IPX8 |
| Maximum coverage area | 80 m² |
| Maximum cleaning depth | 3 m |
| Filter density | 180 μm |
| Flow rate | 13 m³/h |
| Weight | 10 kg |
| Storage temperature | 5°C to 35°C |
Dovanos prie užsakymų nuolat keičiasi dėl riboto jų kiekio
NEMOKAMAS PRISTATYMAS PERKANT UŽ 50 EUR IR DAUGIAU
Nemokamas pristatymas į Omniva paštomatą perkant daugiau nei 50 Eur
Nemokamas pristatymas į LP Express arba Lietuvos paštą perkant daugiau nei 70 Eur
Nemokamas pristatymas į namus ar darbovietę perkant daugiau nei 150 Eur.
PRISTATYMAS Į Express arba Omniva SIUNTŲ TERMINALĄ
Siuntimas kainuoja 2,49 EUR. Į LP Express 3,99
Užsakius iki 14 val., prekes išsiunčiame tą pačią dieną (tik darbo dienomis). Į siuntų terminalą jūsų užsakymas bus pristatytas per 1-3 darbo dienas nuo išsiuntimo dienos. Paštomatas parenkamas automatiškai artimiausias nuo jūsų pateikto adreso.
Nukreipti siuntą į kitą pristatymo vietą galimybės nėra. Siuntą galite atsiimti jums patogiu laiku. Siuntų terminalai veikia 24 valandas per parą.
PRISTATYMAS Į LIETUVOS PAŠTO SKYRIUS
Pristatymo kaina į pašto skyrius – 3,99 EUR.
Užsakius iki 14 val., prekes išsiunčiame tą pačią dieną (tik darbo dienomis). Į Lietuvos pašto skyrius prekės bus pristatytos per 1-3 darbo dienas nuo išsiuntimo dienos.
PRISTATYMAS Į NAMUS AR Į DARBOVIETĘ KURJERIU
Pristatymo kaina - 4,99 EUR
Užsakymą priims kurjeris ir pristatys jums tiesiai į namus ar darbovietę. Dažniausiai tai trunka 1-3 darbo dienas nuo išsiuntimo dienos.
PRISTATYMAS Į UŽSIENIO VALSTYBES
Pristatymo kaina - 6,99 EUR.
Užsakymas išsiunčiamas per 2 darbo dienas. Pristatymo laikas svyruoja nuo valstybės į kurią siunta keliauja. Dažnais atvejais pristatymo laikas yra tik 2-3 dienas ilgesnis nei Lietuvoje.
P.S Pristatymo kaina gali didėti jeigu prekės yra labai didelės arba jų svoris viršyja standartus, kurie nurodyti pristatymo tarnybų puslapiuose. Tokiais atvejais patys susisiekiame ir aptariame situaciją, Jums papildomai nieko daryti nereikia.
