Meross MSS510X smart one-way light switch (HomeKit)
A smart one-way physical switch by Meross will give you convenient control over the lighting in your home. Control the lights remotely with the app, create schedules, set timers and use the smart scenes feature. The device is compatible with Apple HomeKit, Amazon Alexa and Google Assistant, so you can also operate it by voice. The product requires a neutral (blue) wire and a mounting box (not included) for proper setup.

Full control in your hands
The device works not only with the Meross app, but also with Amazon Alexa, Google Assistant and Apple HomeKit. So you're free to control your lighting from anywhere - just reach for your phone! The switch also supports voice control with smart assistants. Now, to turn the lights on or off, all you have to do is say a simple command - you don't even have to move from your seat!

Customize lighting to fit your lifestyle
This is not the end of your possibilities! Using your smartphone, you can easily create a schedule for your lighting or set a timer. Smart scenes are also available. Now your lights can turn on automatically when you get home from work and turn off when you leave the house - just set the times!

User-friendly
The switch has been designed to be as easy and pleasant to use as possible. A special LED indicator not only informs about the status of the device, but also helps to find it in the dark. Installation and configuration of the product will not cause you any problems. You can use already existing Wi-Fi network for this - additional hub is not required.

In the box
- 1x intelligent one-way light switch
- 4x screw
- 1x user manual
| Brand |
Meross |
| Input |
100-240V~, 50/60Hz |
| Output |
100-240V~, 50/60Hz, max. 400W for INC, max. 150W for CFL and LED |
| Button |
1x On/Off button (press and hold for 5 seconds to restore factory settings) |
| LED |
1x device status LED |
| Dimensions |
8.6x8.6x3.5cm |
| Antennas |
1x internal antenna |
| Switch |
1 Way, 1 Gang |
| Wireless connection standard |
IEEE 802.11 b/g/n, 2.4GHz, 1T1R |
| Wireless security |
Product supports 64/128 bit WEP, WPA-PSK, WPA2-PSK.
*Product does not support Enterprise WiFi. |
| Certifications |
CE, RoHS, WEEE |
| System requirements |
iOS 13.0 or above/Android 4.1 or above, existing WiFi network |
| Operating temperature |
0°C-40°C |
| Storage temperature |
-40°C-70°C |
| Operating humidity |
10-90% (non-condensing) |
| Storage humidity |
5-90% (non-condensing) |
,
Inteligentny jednokierunkowy włącznik światła Meross MSS510X (HomeKit)
Inteligentny, jednokierunkowy przełącznik fizyczny marki Meross da Ci wygodną kontrolę nad oświetleniem w Twoim domu. Steruj światłem zdalnie za pomocą aplikacji, twórz harmonogramy, ustawiaj timery i korzystaj z funkcji smart scen. Urządzenie jest kompatybilne z Apple HomeKit, Amazon Alexa i Google Assistant, możesz więc obsługiwać je również głosowo. Do poprawnej konfiguracji produktu niezbędny jest neutralny (niebieski) przewód oraz puszka montażowa (brak w zestawie).

Pełna kontrola w Twoich rękach
Urządzenie współpracuje nie tylko z aplikacją Meross, ale też z Amazon Alexa, Google Assistant oraz Apple HomeKit. Możesz więc swobodnie kontrolować oświetlenie z dowolnego miejsca - wystarczy sięgnąć po telefon! Przełącznik obsługuje też sterowanie głosem za pomocą inteligentnych asystentów. Teraz, aby zapalić lub zgasić światło, wystarczy wydać prostą komendę - nie musisz nawet ruszać się z fotela!

Dostosuj oświetlenie do swojego stylu życia
To nie koniec Twoich możliwości! Za pomocą smartfona możesz w prosty sposób stworzyć harmonogram pracy dla swojego oświetlenia lub ustawić timer. Dostępne są również inteligentne sceny. Teraz światło może włączać się automatycznie, kiedy wracasz z pracy i wyłączać, gdy wychodzisz z domu - wystarczy ustawić odpowiednie godziny!

Przyjazny użytkownikom
Przełącznik został zaprojektowany w taki sposób, aby jego użytkowanie było maksymalnie proste i przyjemne. Specjalny wskaźnik LED nie tylko informuje o statusie urządzenia, ale też pomaga odnaleźć je w ciemności. Montaż i konfiguracja produktu nie sprawią Ci problemu. Możesz wykorzystać do tego już istniejącą sieć Wi-Fi - dodatkowy hub nie jest wymagany.

W zestawie
- 1x inteligentny jednokierunkowy włącznik światła
- 4x śruba
- 1x instrukcja użytkownika
| Producent |
Meross |
| Wejście |
100-240 V~, 50/60 Hz |
| Wyjście |
100-240 V~, 50/60 Hz, maks. 400 W dla INC, maks. 150 W dla CFL i LED |
| Przycisk |
1x przycisk On/Off (naciśnij i przytrzymaj przez 5 sekund, aby przywrócić ustawienia fabryczne) |
| LED |
1x dioda LED statusu urządzenia |
| Wymiary |
8,6 x 8,6 x 3,5 cm |
| Anteny |
1x antena wewnętrzna |
| Przełącznik |
Pojedynczy |
| Standard połączenia bezprzewodowego |
IEEE 802.11 b/g/n, 2.4 GHz, 1T1R |
| Bezpieczeństwo połączenia bezprzewodowego |
Produkt obsługuje 64/128 bit WEP, WPA-PSK, WPA2-PSK.
*Produkt nie obsługuje Enterprise WiFi. |
| Certyfikaty |
CE, RoHS, WEEE |
| Wymagania sprzętowe |
iOS 13.0 lub nowszy/Android 4.1 lub nowszy, działająca sieć WiFi |
| Temperatura pracy |
0°C - 40°C |
| Temperatura przechowywania |
-40°C - 70°C |
| Wilgotność otoczenia pracy |
10-90% (bez skraplania) |
| Wilgotność otoczenia przechowywania |
5-90% (bez skraplania) |