The SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.
Thanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.
Performance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.
A three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.
An advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.
The SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.
Support for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.
| Manufacturer | Sunlu |
|---|---|
| Model | Fila Dryer S4 |
| Rated power | 320–330 W |
| Power supply | AC 100–240 V / 50–60 Hz |
| Maximum temperature | 70°C |
| Heating time to 50°C | approx. 30 minutes |
| Capacity | 4 spools (1 kg each) |
| Internal dimensions | 450 × 210 × 211 mm |
| Device dimensions | 516 × 278 × 350 mm |
| Net weight | 4.8 kg |
| Gross weight | 5.5 kg |
| Heating system | PTC + 3 fans |
| Temperature stability | ±3°C |
| Humidity control | Automatic (start 30–50%, stop approx. 25%) |
| Supported materials | PLA, ABS, PETG, TPU, PA, PC |
| Supported filament diameters | 1.75 mm / 2.85 mm / 3.00 mm |
| Number of filament outlets | 8 (can be used with PTFE tubes) |
| Display | Touchscreen LCD |
Gifts with orders are constantly changing due to their limited quantity
FREE DELIVERY ON PURCHASES OF EUR 50 AND MORE
Free delivery to the Omniva postal machine when purchasing more than 50 EUR
Free delivery to LP Express or Lithuanian Post when purchasing more than 70 EUR
Free delivery to home or workplace when purchasing more than 150 EUR.
DELIVERY TO Express or Omniva PARCEL TERMINAL
Shipping costs EUR 2.49. To LP Express 3.99
If ordered before 14:00, we ship the goods on the same day (only on working days). Your order will be delivered to the parcel terminal within 1-3 working days from the day of dispatch. The nearest post office from the address you provided is automatically selected.
It is not possible to direct the shipment to another delivery location. You can collect the package at a time convenient for you. Parcel terminals are open 24 hours a day.
DELIVERY TO LITHUANIA POST OFFICES
The price of delivery to post offices is EUR 3.99.
If ordered before 14:00, we ship the goods on the same day (only on working days). The goods will be delivered to Lithuanian post offices within 1-3 working days from the day of dispatch.
HOME OR WORKPLACE DELIVERY BY COURIER
Delivery price - 4.99 EUR
The order will be picked up by a courier and delivered directly to your home or workplace. It usually takes 1-3 working days from the day of dispatch.
DELIVERY TO FOREIGN COUNTRIES
Delivery price - 6.99 EUR.
The order is dispatched within 2 working days. The delivery time varies depending on the country to which the package is going. In many cases, the delivery time is only 2-3 days longer than in Lithuania.
PS The price of delivery may increase if the goods are very large or their weight exceeds the standards indicated on the pages of the delivery services. In such cases, we contact and discuss the situation ourselves, you do not need to do anything additional.
