The Bublue A10 PS is a modern pool cleaning robot designed to remove dirt from the bottom and work near the walls – without the need for manual intervention. Thanks to its high power (33 W), it effectively eliminates sand, leaves, and small debris in just one cycle. It works wirelessly for up to 90 minutes, and fast charging means it is ready for the next cycle after only about 3 hours. The DirtLock™ Tech 2.0 system effectively traps dirt in the filter basket, and intelligent wall detection makes it easier for it to move around. In addition, the self-parking function allows you to conveniently remove the robot after it has finished its work. The whole thing is complemented by LEDs that indicate the status of the device.
The high cleaning efficiency is due to the new Bluehole Technology™, which improves the cooperation between the nozzle, motor, and suction impeller. This translates into up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris between 3 and 8 mm in size (compared to the previous generation). As a result, one cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeated operation of the device.
The Bublue A10 PS pool robot has been designed with maximum user convenience in mind, which is why it uses advanced contact sensors that enable quick and precise response to pool walls. The Corner Boost™ technology increases the intensity of cleaning in corners, offering up to twice the effectiveness of removing dirt in these critical areas. When it encounters an edge, the robot automatically corrects its path, moving smoothly and without chaotic bouncing, which translates into smoother and more effective cleaning of the bottom. At the end of the cycle, the device parks itself against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the operating status, charge level, and readiness of the device.
The dual filtration system combines two levels of 80 and 150 mesh screens, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and keeps the water cleaner throughout the entire cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing almost 100% of collected debris from flowing back into the pool. In addition, the optimized basket design provides up to 30% more capacity compared to standard solutions, which means longer operation without the need for frequent emptying.
The Bublue A10 PS features an optimized suction system in which the nozzle, motor, and impeller work in complete synchronization. This design allows for smooth flow of water and debris throughout the entire system, without power loss or sudden drops in performance. The precise alignment of these components translates into stable, effective suction of both small particles and larger debris, regardless of the degree of contamination at the bottom of the pool. The result is consistent robot operation, better energy utilization, and consistently high cleaning efficiency from start to finish.
The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, allowing you to thoroughly clean the bottom of the pool in a single cycle. After cleaning, the device recharges in about 3 hours, so it quickly returns to full readiness and does not require long breaks between uses. This combination of operating time and charging time makes the Bublue A10 PS ideal for above-ground pools with a surface area of up to approximately 80 m² and a flat bottom.
After finishing work, simply rinse the filter and robot housing with a regular garden hose – no need to disassemble the device or use additional accessories. This form of cleaning allows you to easily remove sand, leaves, and small debris.
| Manufacturer | Bublue |
|---|---|
| Model | A10PS-WH-EU |
| Rated power | 33W |
| Operating time | 90 minutes |
| Charger input voltage | 100-240V |
| Charger output voltage | 12.6 V DC |
| Charger output current | 1.8 A |
| Battery capacity | 4400 mAh |
| Charging time | Approximately 3 hours |
| Supported pool area | 80 m² |
| Filter density | 180 μm |
| Weight | 3.5 kg |
| Cleaning depth | 3 m |
| Waterproof rating | IPX8 |
Gifts with orders are constantly changing due to their limited quantity
FREE DELIVERY ON PURCHASES OF EUR 50 AND MORE
Free delivery to the Omniva postal machine when purchasing more than 50 EUR
Free delivery to LP Express or Lithuanian Post when purchasing more than 70 EUR
Free delivery to home or workplace when purchasing more than 150 EUR.
DELIVERY TO Express or Omniva PARCEL TERMINAL
Shipping costs EUR 2.49. To LP Express 3.99
If ordered before 14:00, we ship the goods on the same day (only on working days). Your order will be delivered to the parcel terminal within 1-3 working days from the day of dispatch. The nearest post office from the address you provided is automatically selected.
It is not possible to direct the shipment to another delivery location. You can collect the package at a time convenient for you. Parcel terminals are open 24 hours a day.
DELIVERY TO LITHUANIA POST OFFICES
The price of delivery to post offices is EUR 3.99.
If ordered before 14:00, we ship the goods on the same day (only on working days). The goods will be delivered to Lithuanian post offices within 1-3 working days from the day of dispatch.
HOME OR WORKPLACE DELIVERY BY COURIER
Delivery price - 4.99 EUR
The order will be picked up by a courier and delivered directly to your home or workplace. It usually takes 1-3 working days from the day of dispatch.
DELIVERY TO FOREIGN COUNTRIES
Delivery price - 6.99 EUR.
The order is dispatched within 2 working days. The delivery time varies depending on the country to which the package is going. In many cases, the delivery time is only 2-3 days longer than in Lithuania.
PS The price of delivery may increase if the goods are very large or their weight exceeds the standards indicated on the pages of the delivery services. In such cases, we contact and discuss the situation ourselves, you do not need to do anything additional.
