Double the power and mobility
The SkyRC T200 charger has the most compact design, taking up minimal space, the tick of a pair of batteries. The charger delivers 100 watts of integrated power through each charging circuit. Behind the tasteful casing is enough power to charge two batteries simultaneously at up to 12 amps per channel, so you'll be pumping life into a wide range of batteries in no time, from receiver packs to 6S lithium polymer or NiMH and NiCD 15S batteries. What's more, the charger provides all the programmability you expect from a modern high-end charger.

Multiply efficiency
Both charging channels can be programmed and operated individually. The T200 allows two batteries to be charged intelligently, automatically and simultaneously to their maximum capacity. What's more, the cells being charged do not have to have the same configuration or be of the same type. Feel completely free to choose which packs to charge.

Compatibility and universal XT60 plug
The charger has a charging algorithm that allows it to work with the most common battery types - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD and Pb. The XT60 interface prevents reverse polarity and ensures a very stable connection.

Optimised software
The SkyRC T200 has a so-called AUTO function, which automatically sets the current during charging and discharging. For lithium batteries in particular, the function helps prevent overcharging, which can lead to an explosion due to the user. The function automatically shuts down the circuit and informs the user when an abnormality is detected. All programmes on the T200 are controlled by a two-way signal to ensure maximum safety and minimise problems. All settings can be configured by the user.

Intuitive operation
A panel of five buttons and a brightly illuminated LCD screen make operation of the unit effortless, even for inexperienced users. The charging programmes work in a similar way to other SkyRC chargers, but even if this is your first contact with a programmable charger, you will easily move between parameters by using the up and down arrows to set values and then clicking enter to confirm.

Versatility with AGM and cold modes
AGM batteries are easy to maintain, are very stable and lighter than other lead-acid batteries. Although they have the same structure, the difference in chemical components translates into a big difference in performance. AGM batteries should not be charged with a normal charger in Pb mode. Cold mode allows the battery to be charged at a low temperature.

Adjustable terminal voltage
The SkyRC T200 allows users to change the terminal voltage (for advanced users only).

Special handle
The charger is equipped with a special handle. Its compact design at less than 1 kg makes it the most convenient charger to carry.

Included
Power supply |
DC 11-18 V, AC 100-240 V |
Charging power |
100 W x 2 |
Discharge power |
10 W |
Battery type |
LiPo/LiIon/LiFe/LiHV 1-6S, NiMH/NiCd 1-15S, Pb 2-20V |
Battery capacity |
LiPo/LiIon/LiFe/LiHV 100-50000 mAh, NiMH / NiCd 100-50000 mAh, Pb 100-50000 mAh |
Charging current |
0,1 - 12 A |
Discharge current |
0,1 - 2 A |
Charging voltage |
LiPo: 4.18-4.25V/cell, LiIon: 4.08-4.2V/cell, LiFe: 3.58-3.7V/cell LiHV: 4.25-4.5V/cell, NiMH/NiCD - Delta-Peak detection, Pb Normal: 2.4V/cell, Pb AGM: 2.45V, Pb Cold: 2.45V |
Discharge voltage |
LiPo: 3.0-3.3V/cell, LiIon: 2.9-3.2V/cell, LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell, NiMH/NiCD - 0.1-1.1V/cell |
Balancer |
2-6S |
Housing material |
Plastic |
Dimensions |
178 x 135 x 96 mm |
Weight |
850 g |
Timer |
1-120 minutes |
Operating temperature |
0℃-40℃ |
Display |
2x16 LCD with backlight |
External ports |
XH 1-6S balancer socket, temperature sensor port, battery port, DC input |
,
Podwójna moc i mobilność
Ładowarka SkyRC T200 posiada najbardziej kompaktowa konstrukcję, zajmując minimalną ilość miejsca, tyko tyle co para akumulatorów. Ładowarka dostarcza 100 watów zintegrowanej mocy przez każdy z obwodów ładowania. Za gustowną obudową znajduje się wystarczająca moc, by ładować jednocześnie dwa akumulatory z natężeniem do 12 amperów na kanał, dzięki czemu błyskawicznie wpompujesz życie do szerokiego zakresu akumulatorów, od pakietów odbiornika po litowo-polimerowe akumulatory 6S lub NiMH i NiCD 15S. Co więcej, ładowarka zapewnia pełną programowalność, której oczekuje się od nowoczesnej ładowarki wysokiej klasy.

Zwielokrotnij efektywność
Oba kanały ładowania można programować i obsługiwać indywidualnie. T200 pozwala na inteligentne, automatyczne i jednoczesne ładowanie dwóch akumulatorów do ich maksymalnej pojemności. Co więcej ładowane cele nie muszą posiadać tej samej konfiguracji czy być tego samego typu. Poczuj całkowitą dowolność w wyborze pakietów do ładowania.

Kompatybilność i uniwersalny wtyk XT60
Ładowarka posiada algorytm ładowania pozwalający na pracę z najbardziej powszechnymi typami akumulatorów - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD i Pb. Interfejs XT60 zapobiega odwróconej biegunowości i zapewnia bardzo stabilne połączenie.

Zoptymalizowane oprogramowanie
SkyRC T200 posiada tzw. funkcję AUTO, które ustawia automatycznie natężenie prądu podczas ładowania oraz rozładowania. W szczególności w przypadku akumulatorów litowych funkcja pomaga zapobiec nadmiernemu naładowaniu, które może doprowadzić do wybuchu z winy użytkownika. Funkcja automatycznie wyłącza obwód i informuje użytkownika po wykryciu nieprawidłowości. Wszystkie programy w T200 są kontrolowane sygnałem obustronnym w celu zapewnienia maksymalnego bezpieczeństwa i zminimalizowania ilości problemów. Wszystkie ustawienia mogą być skonfigurowane przez użytkownika.

Intuicyjna obsługa
Panel składający się z pięciu przycisków i jasno podświetlonego ekranu LCD sprawiają, że obsługa urządzenia jest bezproblemowa nawet dla niedoświadczonych użytkowników. Programy ładowania działają w podobny sposób, co inne ładowarki SkyRC, ale nawet jeśli jest to twój pierwszy kontakt z programowalną ładowarką, z łatwością będziesz przechodził pomiędzy parametrami, używając strzałek do góry i w dół, aby ustawić wartości, a potem klikając enter, aby potwierdzić.

Wszechstronność z trybami AGM i zimnym
Akumulatory AGM są łatwe w konserwacji, są bardzo stabilne i lżejsze od innych akumulatorów kwasowo-ołowiowych. Chociaż mają tę samą strukturę, różnica w chemicznych składnikach przekłada się na dużą różnice w działąniu. Nie należy ładować akumulatorów AGM normalną ładowarką w trybie Pb. Tryb zimny pozwala ładować akumulator w niskiej temperaturze.

Regulacja napięcia końcowego
SkyRC T200 pozwala użytkownikom na zmianę napięcia końcowego (tylko dla zaawansowanych użytkowników).

Specjalny uchwyt
Ładowarka została wyposażona w specjalną rączkę. Dzięki kompaktowej konstrukcji przy wadze poniżej 1 kg jest to najwygodniejsza ładowarka w transporcie.

W zestawie
- Ładowarka T200
- Kabel zasilający
Zasilanie |
DC 11-18 V, AC 100-240 V |
Moc ładowania |
100 W x 2 |
Moc rozładowania |
10 W |
Typ akumulatora |
LiPo/LiIon/LiFe/LiHV 1-6S, NiMH/NiCd 1-15S, Pb 2-20V |
Pojemność akumulatora |
LiPo/LiIon/LiFe/LiHV 100-50000 mAh, NiMH / NiCd 100-50000 mAh, Pb 100-50000 mAh |
Prąd ładowania |
0,1 - 12 A |
Prąd rozładowania |
0,1 - 2 A |
Napięcie ładowania |
LiPo: 4,18-4,25V/cela, LiIon: 4,08-4,2V/cela, LiFe: 3,58-3,7V/cela LiHV: 4,25-4,5V/cela, NiMH/NiCD - Detekcja Delta-Peak, Pb Normal: 2,4V/cela, Pb AGM: 2,45V, Pb Cold: 2,45V |
Napięcie rozładowania |
LiPo: 3,0-3,3V/cela, LiIon: 2,9-3,2V/cela, LiFe: 2,6-2,9V/cela LiHV: 3,1-3,4V/cela, NiMH/NiCD - 0,1-1,1V/cela |
Balanser |
2-6S |
Materiał obudowy |
Plastik |
Wymiary |
178 x 135 x 96 mm |
Waga |
850 g |
Wyłącznik czasowy |
1-120 minut |
Temperatura pracy |
0℃-40℃ |
Wyświetlacz |
2x16 LCD z podświetleniem |
Zewnętrzne porty |
Gniazdo balansera XH 1-6S, port czujnika temperatura, port akumulatora, wejście DC |